Royalrep
It is cement based; polymer and polypropylene fiber added repair set mortar, which has decreased shrinkage, increased endurance, elasticity and adherence properties.Application Areas:
All sorts of building repairs.
Filling the gaps occuring in reinforced concrete during construction.
Material Preparation:
25 kg. material is poured slowly into 3,5 - 4 lt water during this addition it should be stirred. This figure are subject to change due to temperature. The mortar should be mixed well with a low speed mixer to reach homogeneous consistency. The pot life ot the mixture changes in accordance with water amount and weather conditions.
Traits:
It is very easy to use, It gets ready by just adding water.
It can be used for all applications due to it is very low shrinkage.
It has monolithic workability with old concrete due to its high adherence.
Its abrasion resistance and hardness is very high.
Technical Specifications:
Colour : Gray
Granule size : 0 - 2 mm
Pressure resistance for 28 days> 500 kg/cm²
Pulling endurance for 28 days bending > 80 kg/cm²
Enduring against oils, chemicals and acids.
Water impermeability.
Doesn`t contain solvent and asbestos.
Resistance of thaw and freze.
Surface Preparation:
The application surface should be cleaned and tough, also loose materials and dried cement slurry should be removed. There should be no substances such as dirt, grease, oil, rust. Absorbent surfaces should be wetted prior to application but there should not be any water drops left.
Packaging:
25 kg craft bags.
Storage:
6 months in unopened original packets.
Store it in a dry environment.